Working With Emds; Using Shortcuts For Special Characters; Using Programmable Keys (Pfkeys) - Fujitsu SE700 User Manual

Working with EMDS

14.2 Working with EMDS
If you open an operation instance BS2000 terminal in the SE Manager or via PuTTY, after
successful authentication the EMDS application will start automatically and provide the
"terminal" functionality. Alternative accesses are available in addition to the accesses to the
BS2000 console and BS2000 dialog using the SQ Manager:

14.2.1 Using shortcuts for special characters

When you work with EMDS, special characters are available which you can access by
means of shortcuts. The table below shows the most important shortcuts:
Keys
Shift
Esc
Esc Shift
Table 7: EMDS – Shortcuts for special characters
Hold down the [Shift] key when you press an [Fn] key. Press the [Esc] key once briefly
before you press [Fn] or [Shift] - [Fn].

14.2.2 Using programmable keys (pfkeys)

You can use programmable keys (pfkeys) when you work with EMDS. Proceed as follows
to assign values to the pfkeys:
Press [Esc] [Shift] - [F11] in the EMDS window (PP in the table above).
Ê
352
F1 F2 F3 F4
NIL LZF LVD
EFZ AFZ LZE LSP
P1 P2 P3 P4
P11 P12 P13 P14
F5 F6 F7 F8
K1 K2 K3 MAR ED
F1 F2 F3 RS
P5 P6 P7 P8
P15 P16 P17 P18
Appendix
F9 F10 F11 F12
EM DUE1
WAZ SY AM DUE2
P9 P10 LA1 HC
P19 P20 PP SC
U41855-J-Z125-3-76