Managing Members Of A Danpr Network; Configuring The Acl Settings Of The Danpr Network; Information On The Performance And Utilization Of The Danpr Ports - Fujitsu SE700 User Manual

Managing IP networks
10.2.3.3

Managing members of a DANPR network

You can display the active MAC addresses and add or remove ports (members of the
network) for each DANPR.
Proceed as described in
i
10.2.3.4

Configuring the ACL settings of the DANPR network

You can add and delete ACL entries for each DANPR.
Select Hardware → IP networks → Data Network Private → DANPR<no>, ACL tab.
Ê
Proceed as described in
10.2.3.5

Information on the performance and utilization of the DANPR ports

An overview of the performance and utilization of the ports belonging to the network is
provided by the Performance tab.
Select Hardware → IP networks → Data Network Private → DANPR<no>, Performance tab.
Ê
The Performance tab displays the ISL performance view and Unit performance view tables.
Detailed information is provided in
of the DANPU
268
section "Managing a Data Network
Caution:
After assigning a port of a unit in the untagged mode to a network, that port cannot
be assigned to an additional network.
In dual mode, assigning the port for other networks is only possible as tagged.
ports".
section "Configuring the ACL settings of the DANPU
section "Information on the performance and utilization
Managing hardware
Public".
U41855-J-Z125-3-76
network".