Fujitsu SE700 User Manual page 215

Managing hardware
Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Management,
Ê
SNMP tab:
The SNMP tab displays information on the configuration of the local system data, allowed
read accesses, and trap receivers.
The following functions are available in the SNMP tab:
Changing local system data for SNMP
In the Configuration of local system data group click the Change icon, and in the
Ê
subsequent dialog box make changes to the system file.
i
Adding or removing allowed read accesses
In the Allowed read accesses group select one of the following procedures:
Ê
Ê
Ê
U41855-J-Z125-3-76
The SE Manager displays the SYSLOCATION in the header.
In a Management Cluster, SYSLOCATION should be the same as the Location
of the Unit's SE server.
To add a new read right, click Add new read access, and after making the necessary
entries confirm the action.
To remove a read access, click the Remove icon by the required read access and
confirm the action.
Managing units of the SE server
213