Fujitsu SE700 User Manual page 355

Appendix
The pfkey menu is displayed:
Press the pfkey to which you want to assign a value twice. To do this, use the key
Ê
shortcuts from the table on page
Now assign a value to the selected pfkey, e.g. a frequently used command.
Ê
Terminate the entry by pressing the selected pfkey again, for example [Esc] [F7] for P7.
Ê
Ê Press [Esc] [Shift] - [F11] (PP in the table above) to return to the EMDS window.
Proceed as follows if you want to change an existing pfkey assignment:
Press the pfkey to which you want to change once. To do this, use the shortcuts from
Ê
the table on
Position the cursor with the arrow keys on a character in the existing assignment.
Ê
Ê
Ê
Ê
U41855-J-Z125-3-76
352, for example [Esc] [F7]for P7.
page
Press the [Del] key to delete the character.
Press the pfkey again (in the example [Esc] [F7] for P7) and enter a character which
will overwrite the existing character. Press the pfkey once again to terminate
assignment.
Press the [Enter] key and then the pfkey again (in the example [Esc] [F7] for P7)
and enter a character which will overwrite the existing one Press the pfkey once
again to terminate assignment.
352, for example [Esc] [F7], [Esc] [F7] for P7, P7.
page
Working with EMDS
353