Configuring The Acl Settings Of The Manpu Network; Information On The Performance And Utilization Of The Manpu Ports - Fujitsu SE700 User Manual

Managing hardware
The following functions are available:
Displaying the MAC address
Ê
Adding ports
Ê
Removing a port
Ê
10.2.4.1

Configuring the ACL settings of the MANPU network

You can add and delete ACL entries for each MANPU.
Select Hardware → IP networks → Management Network Public →
Ê
[<se server>(SE<model>) →] MANPU, ACL tab.
v
Proceed as described in
on page
10.2.4.2

Information on the performance and utilization of the MANPU ports

An overview of the performance and utilization of the ports belonging to the public
management network is provided by the Performance tab.
Select Hardware → IP networks → Management Network Public →
Ê
[<se server>(SE<model>) →] MANPU, Performance tab.
The Performance tab displays the Uplink performance view, ISL performance view and Unit
performance view tables.
Detailed information is provided in
of the DANPU ports" on page
U41855-J-Z125-3-76
In the Net Unit information group click the MAC addresses icon by the required unit.
The subsequent dialog box Display MAC addresses displays the unit's active MAC
addresses.
In the Net Unit information group click Add ports, follow the instructions of the wizard,
and select the ports.
In the Net Unit information group click the Delete icon by the required unit and confirm
the action.
If you set permit mode and enable ACL without entering services in the list,
network access is locked for all services. For the MANPU network this means
that you, as administrator, "lock yourself out."
261.
section "Configuring the ACL settings of the DANPU network"
section "Information on the performance and utilization
263.
Managing IP networks
271