Fujitsu SE700 User Manual page 208

Managing units of the SE server
Displaying FC interfaces of the MU
Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Information,
Ê
FC interfaces tab:
The FC interfaces tab displays three groups with information on the FC interfaces:
FC interfaces provides information for each FC interface of the MU on the host controller
●
used, the plug-in position (slot and port), the Type (firmware and revision status), the
local WWPN (World Wide Port Number) of the FC interface, and the connection
channel to the Server Unit /390 (Channel Path ID - CHPID). The hardware status of the
FC interface is also displayed (UP/DOWN).
FC targets contains the WWPNs of the FC interfaces on the accessible FC controllers
●
(targets). The WWPN identifies a port unambiguously worldwide.
FC paths contains information on the connections between the units and the accessible
●
FC controllers. Address information on the end points of the various connections is
displayed.
206
Managing hardware
U41855-J-Z125-3-76