Managing Kvp Devices - Fujitsu SE700 User Manual

Managing BS2000 devices

9.1.5 Managing KVP devices

A KVP (console distribution program) with the name HV0 is preconfigured on the MU and
SU x86 (see
and then define a new one with different values.
BS2000 sees a KVP as two (emulated) KVP devices (or a device pair) which are identified
by their mnemonic names.
For VM2000 mode it is necessary to define at least one KVP per VM. By default HV0 is the
monitor system's KVP.
Access to a BS2000 console always takes place via the KVP and the home account. An
operator requires an individual right for access. For information on this, see
"Opening the BS2000 console and dialog window" on page
i
Select Devices → [<se server>(SE<model>) →] <unit> (SU<model>) → BS2000 devices,
Ê
KVP tab.
176
table 4 on page 168
Recommendation:
Define precisely one KVP for each VM (in the case of SU /390 for each MU).
and table 6 on page
Managing devices
171). You can delete the existing KVP
112.
section
U41855-J-Z125-3-76