Managing BS2000 devices
i
i
The LAN tab offers the following functionality for managing the LAN devices:
Add new LAN device
Click Add new LAN device.
Ê
In the Add LAN device wizard you can specify the required properties of the LAN device step
by step.
Restart LAN device
The restart allows you to rectify a problematical situation which affects the device.
By the required device click the Restart icon and confirm the action.
Ê
Removing a LAN device
Click the Remove icon by the required LAN device and confirm the action.
Ê
180
Information on the generated LAN devices on SU /390
The devices are displayed only if the active IORSF file has the status "File
transferred".
–
Entries of the type IORSF display devices which are generated exclusively in
the IORSF.
–
Entries of the type LOCLAN and ZASLAN display the LAN devices already
defined. If the device is also generated in the IORSF, a valid channel path
identifier is displayed under CHPID. Otherwise only a warning icon is displayed
under CHPID, and the device must still be generated (in BS2000 with /ADD-IO-
UNIT).
In VM2000 mode the table contains an additional column: if a device assignment
exists, the Assigned column displays the VM.
Managing devices
U41855-J-Z125-3-76