Managing units of the SE server
10.1.5.8
Generating diagnostic data
To support error diagnosis by Customer Support, the administrator or operator can
generate diagnostic data when an error situation occurs and send this to the Support
Center.
Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (HNC) → Service,
Ê
Diagnostics tab.
The functionality of the tab is the same as that for the MU (see
diagnostic data" on page
The file name of the diagnostic data file for the HNC is:
DIAGtar.H<software-version><unit-name>.<date>.<time>.gz
236
222).
Managing hardware
section "Generating
U41855-J-Z125-3-76