Managing Passwords - Fujitsu SE700 User Manual

Managing authorizations

12.1.2 Managing passwords

In the Password management tab you manage the passwords of all defined local accounts.
i
The passwords of the local accounts have the attributes Validity time, Warning time, Minimum
time, and Inactivity time:
– During the Validity time, which applies from the last time the password was set, it is
possible to log in without restriction.
– During the Minimum time which is defined by the administrator, the BS2000
administrator, operator, AU administrator or XenVM administrator cannot change their
own password.
– During the Warning time, a warning is issued that the password will soon no longer be
valid. However, it is possible to log in without restrictions.
– During the Inactivity time, the password is no longer valid, but it is still possible to log in.
Directly after a user has logged in, a request to change the password is issued.
– After the Inactivity time has elapsed, the account is locked. It can be opened again from
an(other) administration account or, if necessary, by Customer Support.
– The value -1 for the Inactivity time results in the inactivity time not elapsing.
– The value 99999 for the Validity time means, in practice, that you need not change the
password.
The figure below shows the relationship between these times.
Minimum
time
Last
change
U41855-J-Z125-3-76
(The passwords of LDAP accounts are only managed on the LDAP server.)
Login possible
Validity time
Inactivity
Warning
time
time
Password
expired
Users
Account locked
Time
303