Chapter 8: Mlt And Smlt Link Aggregation Configuration Using The Cli; Job Aid: Roadmap Of Mlt And Smlt Commands - Avaya 8600 Configuration Manual

Chapter 8: MLT and SMLT link aggregation
Configure link aggregation to provide link level redundancy and increase load sharing. Multi-Link Trunking
(MLT) is a link aggregation technology that allows grouping several physical Ethernet links into one logical
Ethernet link to provide fault-tolerance and high-speed links between routers, switches, and servers. SMLT
is an option that improves Layer 2 (bridged) resiliency.

Job aid: Roadmap of MLT and SMLT commands

The following table lists the commands and their parameters that you use to complete the
procedures in this section.
config mlt <mid>
config mlt <mid> add
config mlt <mid> remove
Configuration — Link Aggregation, MLT, and SMLT
configuration using the CLI
Command Parameter
create
cp-limit <enable|disable>
[multicast-limit <value>]
[broadcast-limit <value>]
delete
info
mcast-distribution <enable|
disable>
name <string>
ntstg <enable|disable>
perform-tagging <enable|
disable>
info
ports <ports>
vlan <vid>
info
ports <ports>
January 2012 93