Viewing Vlacp Port Configuration; Enabling Or Disabling Vlacp - Avaya 8600 Configuration Manual

slow-periodic-time
timeout
timeout-scale

Viewing VLACP port configuration

View the VLACP port configuration to see the port information.
Procedure steps
1. View the VLACP port configuration by using the following command:
show ports info vlacp [vlan <value>] [port <value>]

Enabling or disabling VLACP

Enable or disable the VLACP globally to reset all port level settings on the chassis.
Important:
Changes made at the global level overrides and resets all port level settings.
Configuration — Link Aggregation, MLT, and SMLT
Variable
<milliseconds>
{long|short}
<integer>
Viewing VLACP port configuration
Value
Sets the slow periodic time (in milliseconds)
for a specific port type.
The default value is 30000.
Sets the port to use the long or short timeout:
• long sets the port to use the timeout-
scale value multiplied by the slow-periodic-
time.
• sets the port to use the timeout-
short
scale value multiplied by the fast-periodic-
time.
For example, if you specify a short timeout,
set the timeout-scale value to 3, and the fast-
periodic-time to 400 ms, the timer expires
within 1000 to 1200 ms.
The default value is long.
Sets a timeout scale for a specific port-type
(where timeout-scale = periodic-time x
timeout-scale). The default value is 3.
• integer is the timeout scale, an integer
value in the range 2 to 10.
January 2012 115