Configuring Global Lacp Parameters - Avaya 8600 Configuration Manual

show lacp info
show ports info lacp
show ports stats lacp [port
<value>]

Configuring global LACP parameters

Configure LACP parameters to enable or disable LACP globally. When the LACP system
priority is set globally, it applies to all LACP-enabled aggregators and ports. When you enable
LACP on an aggregator or a port, it will use the global system priority value.
Important:
Changes made at the global level override and reset all port level settings.
Procedure steps
1. Configure LACP globally by using the following command:
Configuration — Link Aggregation, MLT, and SMLT
Command
Configuring global LACP parameters
Parameter
system-priority <integer>
timeout {long|short}
timeout-scale <integer>
actor-admin [vlan <value>]
[port <value>]
all [vlan <value>] [port
<value>]
actor-oper [vlan <value>]
[port <value>]
extension [vlan <value>]
[port <value>]
partner-admin [vlan <value>]
[port <value>]
partner-oper [vlan <value>]
[port <value>]
January 2012 87