Avaya 8600 Configuration Manual page 62

Ethernet routing switch
Hide thumbs Also See for 8600:
Table of Contents

Advertisement

Link aggregation configuration using Enterprise Device Manager
SlowPeriodicTimeOper
AggrWaitTime
AggrWaitTimeOper
TimeoutScale
TimeoutScaleOper
ActorSystemPriority
ActorSystemID
ActorAdminKey
62
Configuration — Link Aggregation, MLT, and SMLT
Variable
Comments? infodev@avaya.com
Value
The default value is 30000.
The operating value of the slow periodic timer
on the port.
The default value is 30000.
Specifies the number of milliseconds to delay
aggregation to allow multiple links to aggregate
simultaneously. The range is 200–2000.
The default value is 2000.
The operating value of the aggregate wait timer
on the port.
The default value is 2000.
Assigns the value used to calculate timeout
time from the periodic time. Set this value to all
LACP enabled ports. The range is 2–10.
The default value is 3.
The operating value of the timeout scale on the
port.
The default value is 3.
The two octet read-write value indicating the
priority value associated with the actor system
ID. The range is 0–65535.
The default value is 32768.
The six octet read-write MAC address value
used as a unique identifier for the system that
contains this aggregator.
From the perspective of the link aggregation
mechanisms, only a single combination of
actor system ID and system priority are
considered, and no distinction is made
between the values of these parameters for an
aggregator and the ports that are associated
with it; that is, the protocol is described in terms
of the operation of aggregation within a single
system. However, the managed objects
provided for the aggregator and the port both
allow management of these parameters. The
result of this is to permit a single piece of
equipment to be configured by management to
contain more than one system from the point
of view of the operation of link aggregation.
This can be of particular use in the
configuration of equipment that has limited
aggregation capability.
The current administrative value of the key for
the aggregator. The administrative key value
January 2012

Advertisement

Table of Contents
loading

This manual is also suitable for:

8800

Table of Contents