Viewing Vlacp Flap Detect And Damping Configuration - Avaya 8600 Configuration Manual

Variable definitions
The following table defines optional parameters that you enter to configure VLACP flap detect
and damping.
flap-detect
flap-frequency
flap-interval
<port>

Viewing VLACP flap detect and damping configuration

View the VLACP configuration to view the current VLACP flap detect and damping settings.
Procedure steps
1. To view VLACP configuration and VLACP Flap information, use the following
2. To clear VLACP Flap information, use the following command:
Variable definitions
The following table defines the parameters that you enter with the show port info vlacp
command.
Configuration — Link Aggregation, MLT, and SMLT
Variable
<true | false>
<integer>
<seconds>
command:
show port info vlacp
clear vlacp flap-stats [<ports>]
Viewing VLACP flap detect and damping configuration
Value
Enable or disable the flap detect feature.
Flap detect is disabled by default.
Specifies the flap frequency. The value
ranges from 3-30.
The default is 3.
Specifies the flap interval, in seconds. The
value ranges from 10-600.
The default is 60.
Specifies the port or portlist.
January 2012 117