Avaya 8600 Configuration Manual page 65

PartnerAdminPort
PartnerOperPort
PartnerAdminPortPriority
PartnerOperPortPriority
PartnerAdminState
Configuration — Link Aggregation, MLT, and SMLT
Variable Value
manually configured, this value is assigned by
the local system.
The default value is 0.
The current administrative value of the port
number for the protocol partner. This is a 16–
bit read-write value in the range of 0–65535.
The assigned value is used, along with the
value of PartnerAdminSystemPriority,
PartnerAdminSystemID, PartnerAdminKey,
and PartnerAdminPortPriority, to achieve
manually configured aggregation.
The default value is 0.
The operational port number assigned to this
aggregation port by the aggregation port's
protocol partner. The value of this attribute can
contain the manually configured value carried
in AggPortPartnerAdminPort if there is no
protocol partner. This 16 bit value is read-
only.
The default value is 0.
The current administrative value of the port
priority for the protocol partner. This is a 16–bit
read-write value in the range of 0–65535. The
assigned value is used with the values of
PartnerAdminSystemPriority,
PartnerAdminSystemID, PartnerAdminKey,
and PartnerAdminPort to achieve manually
configured aggregation.
The default value is 0.
The priority value assigned to this aggregation
port by the partner. The value of this attribute
can contain the manually configured value
carried in PartnerAdminPortPriority if there is
no protocol partner. This 16 bit value is read-
only.
The default value is 0.
A string of eight bits, corresponding to the
current administrative value of Actor state for
the protocol partner. This attribute value is
read-write. The assigned value is used to
achieve manually configured aggregation. The
values are:
• lacpActive
• synchronization
• defaulted
Configuring LACP on a port
January 2012 65