Variable definitions
Use the data in the following table to help you view the MLT-based SMLT configuration.
Variable
Id
SmltId
MltType
RunningType
Adding ports to an MLT-based SMLT
Use the MultiLink/LACP Trunks tab to add ports to the MLT-based SMLT.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > VLAN.
2. Click MLT/LACP.
3. Click the MultiLink/LACP Trunks tab.
4. Click Insert.
5. In the PortMembers box, click [...] for the MLT-based SMLT to which you are adding
6. Doe one of the following:
Configuration — Link Aggregation, MLT, and SMLT
Shows the MLT ID for this SMLT Read-only.
Shows the MLT-based SMLT ID number.
Specifies the type of MLT:
• normalMLT
• istMLT
• splitMLT
Indicates the MLT operational type:
• normalMLT
• istMLT
• splitMLT
ports.
• Select the port numbers to be added.
• Click All to select all ports.
Adding ports to an MLT-based SMLT
Value
January 2012
73