Configuring Global Lacp Parameters - Avaya 8600 Configuration Manual

Interface Configuration mode
lacp

Configuring global LACP parameters

Configure LACP parameters globally. When the LACP system priority is set globally, it applies
to all LACP-enabled aggregators and ports. When LACP is enabled on an aggregator or a port,
it will use the global system priority value.
New global parameter configuration is in effect when LACP is restarted globally or per port.
Configuration — Link Aggregation, MLT, and SMLT
Command Parameter
system-priority <0–65535>
timeout-scale <2–10>
aggregation enable
aggr-wait-time <200–2000>
enable
fast-periodic-time <200–20000>
key <0–65535>
min-links <1-8>
mode {active, passive}
partner-key <0–65535>
partner-port <0–65535>
partner-port-priority <0–65535>
partner-state <0x00–0xff>
partner-system-id
<0x00:0x00:0x00:0x00:0x00:0x00>
partner-system-priority <0–65535>
priority <0–65535>
slow-periodic-time <10000-30000>
system-priority <0-65535>
timeout-scale <2-10>
timeout-time {long,short} [timeout-
scale <2-10>]
Configuring global LACP parameters
January 2012 125