Miele H 2265-1 E Operating And Installation Instructions page 81

Problem
The FlexiClip telescopic
runners do not push in
or pull out smoothly.
The top oven lighting
does not switch on.
Possible cause and remedy
The bearings in the FlexiClip telescopic runners are
not sufficiently lubricated.
 Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed to
withstand the high temperatures in the oven
compartment. Other lubricants may harden and
stick to the FlexiClip telescopic runners when they
are heated. You can obtain the special Miele
lubricant from your Miele dealer or from Miele.
The halogen lamp is faulty and needs replacing.

Danger of burning!
Make sure the oven heating elements are switched
off. Make sure the oven compartment has cooled
down.
 Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket, or switch off at the mains circuit breaker.
 Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.
 Replace the halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
 Refit the lamp cover together with its seal and turn
clockwise to secure.
 Reconnect the oven to the electricity supply.
You have selected the
oven lighting does not switch on with this function.
Problem solving guide
 function. The
Eco Fan Heat
81