Nilfisk-Advance SCRUBTEC 344 Series Service Manual page 145

Service Manual – SC401, SCRUBTEC 344
Brush Deck (continues)
8 Pay attention to disconnect the detergent hose (H) (see
9 Remove the tie cable to release the motor harness
10 Unscrew the 2 retaining nuts (I), (J) and disconnect the brush motor power supply cables
11 Extract the brush deck (K) from beneath the solution tank
H
Figure 8:
Installation
12 Assemble the components in the opposite order they were removed in, ensuring the brush motor power
supply cable polarities are correct
"detergent pump" paragraph)
K
I
34 - Scrub System, Disc
J
145