Nilfisk-Advance SCRUBTEC 344 Series Service Manual page 100

Service Manual – SC401, SCRUBTEC 344
Drive System Gearmotor (continues)
7 Retrieve the 2 keys (E), the 2 washers (F) and the 2 circlips (G)
8 Unscrew the 3 screws (H) from the brush deck levers and retrieve the bushings
9 Remove the clamp (I) and disconnect the Drive system gear motor (J)
10 Unscrew the 4 screws (K) and retrieve the washers, then remove the Drive system gear motor (L)
G
F
K
L
Figure 10:
11 Assemble the components in the reverse order of disassembly
E
H
H
K
20 - Wheel System, Traction
H
I
J
100