Replace the Electrode Stack
Replace the electrode stack when it is contaminated. To replace
the electrode stack, refer to
procedures.
Ensure your fingers do not make contact with the
diffusion barrier or the electrodes on the underside of
the stack.
1. Remove the sensor cover.
2. Remove the old electrode stack.
3. Insert the new electrode stack.
4. Replace the sensor cover.
WEEE Battery Directive
Failure to comply with the following battery removal and disposal instruc-
tions may result in battery shorting, battery leakage, and/or other dam-
age. Ensure a qualified technician completes the following procedures.
Removal and Disposal of the Battery Pack
To remove the alkaline batteries, refer to steps #1 to #3 in
Alkaline Batteries on page
To remove the lithium battery pack, refer to steps #1 and #2 in
the Lithium Battery Pack on page
Dispose of the battery pack according to local laws.
Removal and Disposal of the Coin Cell
Find Quality Products Online at:
Table
22.,
Figure
16., and the following
a Caution
82.
83.
GlobalTestSupply
www.
Replacing the
Replacing
GasAlertMicro 5/PID/IR
.com
sales@GlobalTestSupply.com
Maintenance
87