GasAlertMicro 5/PID/IR
User Manual
Figure 16. Parts of the PID
86
Find Quality Products Online at:
Replace the Lamp
Replace the lamp when it falls below the acceptable level. Possible
indicators that the lamp requires replacement are as follows:
To replace the lamp, refer to the illustrations and procedures in the
PID Lamp Cleaning Kit.
If required, contact BW Technologies by Honeywell for more information.
GlobalTestSupply
www.
• The detector will not calibrate.
• The startup self-test fails.
• The ppm levels are incorrect.
.com
sales@GlobalTestSupply.com