Replacing A Sensor Or Sensor Filter - Honeywell BW GasAlertMicro 5 User Manual

GasAlertMicro 5/PID/IR
User Manual
For sensor problems, refer to Troubleshooting.
84
Find Quality Products Online at:
To replace a sensor or sensor filter, refer to
the following procedures 1-7.
GlobalTestSupply
www.
Figure 15. Replacing a Sensor or Sensor Filter
Note
Detectors that are configured for 1, 2, 3, or 4 gases may
contain a dummy sensor in one of the four sensor locations.
.com
sales@GlobalTestSupply.com
Figure 15., Table 21., and