Setting The Remaining Alarm Setpoints; Finish Calibration - Honeywell BW GasAlertMicro 5 User Manual

GasAlertMicro 5/PID/IR
User Manual
Setting the Low Alarm Setpoint
The current low alarm setpoint displays for the selected sensor.
Press H or G to change the value for the low alarm setpoint. When the
required value displays, press C to confirm.
Setting the High Alarm Setpoint
The current high alarm setpoint displays for the selected sensor.
Press H or G to change the value for the high alarm setpoint. When the
required value displays, press C to confirm.
Proceed to step #9 Setting the Remaining Alarm
60
Find Quality Products Online at:

Setting the Remaining Alarm Setpoints

Finish Calibration

Setpoints.
GlobalTestSupply
www.
9. Repeat step #8 to set the alarm setpoints for the remaining
sensors. When complete, the detector emits two quick beeps
and proceeds to Finish Calibration.
10. The detector displays the following screen to indicate that
calibration is complete.
.com
sales@GlobalTestSupply.com