Honeywell BW GasAlertMicro 5 User Manual page 41

LEL Sensor
This option is used to enter compensation
factors for hydrocarbons other than
methane. The factor can only be applied if
the LEL sensor has been calibrated with
methane.
After selecting the LEL sensor, press H
to scroll to Correction. Press C within
20 seconds to confirm and access the LEL
correction library.
Scroll to the required gas type and
press C. A check displays in the
corresponding checkbox. The detector
automatically applies the correction factor.
To disable the Correction option, press H
to scroll to None or to Methane. A check
displays in the corresponding checkbox. If
required, select a different gas type
correction factor.
Custom: To enter a correction factor that
is not listed in the library, press H to scroll
to Custom and press C within 5 seconds
to confirm.
The Custom LEL correction screen displays. Press G or H to select the
required value, and press C within 5 seconds to confirm.
Find Quality Products Online at:
PID Sensor
GlobalTestSupply
www.
This option is used to enter compensation
factors for selected gas types. The factor
can only be applied if the PID sensor has
been calibrated with isobutylene.
After selecting the PID sensor, press H
to scroll to Correction. Press C within
20 seconds to confirm and access the
PID correction library.
Scroll to the required gas type and
press C. A check displays in the
corresponding checkbox. The detector
automatically applies the correction factor.
To disable the Correction option,
press H to scroll to None or to Isobutyl.
A check displays. If required, select a
different gas type correction factor.
Custom: To enter a correction factor for
a custom PID sensor, scroll to Custom
and press C. Press G or H to scroll to
the required value, and press C within
5 seconds to confirm. Refer to the PID
Correction Factor PID Correction Factor
(CF) Library Library for gas types and
corresponding correction factor values.
.com
GasAlertMicro 5/PID/IR
User Options Menu
sales@GlobalTestSupply.com
31