Bump Daily Enabled - Honeywell BW GasAlertMicro 5 User Manual

GasAlertMicro 5/PID/IR
User Manual

Bump Daily Enabled

BW recommends that a bump test to all sensors be
performed every 24 hours prior to the beginning of the
work shift.
13. If Bmp Daily (bump daily) is enabled in tech mode, the follow-
ing screens display.
If a bump test of the LEL and O
detector will deactivate.
Apply the LEL gas and then apply the O
percentage than the default 20.9%, such as 18% O
18
Find Quality Products Online at:
a Caution
sensor is not performed, the
2
(a higher or lower
2
).
2
GlobalTestSupply
www.
Successful Bump Test: If the bump test passes, the following screens
display.
The detector waits for the sensor(s) to clear (30 seconds) and then
enters normal operation.
Unsuccessful Bump Test: If the bump test is unsuccessful or the bump
test is not performed, the following screen displays and the detector
deactivates.
.com
sales@GlobalTestSupply.com