Honeywell BW GasAlertMicro 5 User Manual page 103

Table 21. Troubleshooting
Problem
Pump Operation Troubleshooting
Table 21. Troubleshooting
Problem
Clock Errors Troubleshooting
Find Quality Products Online at:
Possible Cause
There is an obstruction in the
tubing.
Filter needs to be cleaned or
replaced.
Possible Cause
GlobalTestSupply
www.
Generation 1: 116885-L3 (yellow) and 118933-L3 (black) on page 64
If using tubing that is attached to the sample probe, determine if it is
obstructed. If not, replace the pump filter. Refer to
Filter on page 68
Generation 2: 130916-L3 (yellow) and 130917-L3 (black) on page 65
If using tubing that is attached to the sample probe, determine if it is
obstructed. If not, clean or replace the pump filter. Refer to Replacing the
Pump Filter (Generation 2 Pump) on page 67.
Generation 1: 116885-L3 (yellow) and 118933-L3 (black) on page 64
If using tubing that is attached to the sample probe, determine if it is
obstructed. If not, replace the pump filter. Refer to
Filter on page 68
Generation 2: 130916-L3 (yellow) and 130917-L3 (black) on page 65
If using tubing that is attached to the sample probe, determine if it is
obstructed. If not, clean or replace the pump filter. Refer to Replacing the
Pump Filter (Generation 2 Pump) on page 67.
Solution
.com
GasAlertMicro 5/PID/IR
Troubleshooting
Solution
Attaching the Auxiliary
Attaching the Auxiliary
sales@GlobalTestSupply.com
93