Table of Contents
Advertisement
76/96
5.9
Set time and date, ID numbers, battery time
© Landis+Gyr
The following values can be changed at any time from the service menu
(set mode):
Date and time
Identification numbers
Operating time of battery
Below is an example on how to set the date and time.
1.
All segments of the
display are lit
2.
Enter service menu
R
3.
Enter set mode
4.
Select required
setting
5.
Select digit to be
R
changed
6.
Change digit value
7.
Select digit to be
R
changed
Repeat steps 5 – 7 for all digits to be changed.
8.
9.
Confirm new
R
setting
Repeat steps 4 – 9 for all settings to be changed.
10.
11.
Advance display
until End
12.
Back to service
menu
13.
Advance display
until End
14.
Back to operating
display
15.
Close and re-seal the front door.
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
Operation
Operating
display
Display check
Set mode
Identification
number
Date, old
value
Digit flashes
Digit flashes
Next digit
flashes
All digits flash
Date, new
value
End of set
mode
Service menu
End of service
menu
Operating
display
Advertisement
Table of Contents
