Landis+Gyr E650 Series 4 User Manual page 73

Operation
Notes
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
By parameterisation, the energy supply company can select between a
standard identification and its own identification. The standard identification
has the following structure:
/LGZ...
/LGZ 4...
/LGZ4 \2...
/LGZ4\2 ZMD410...
/LGZ4\2ZMD410 41...
/LGZ4\2ZMD41041 00...
/LGZ4\2ZMD4104100 .B40
Stored values
e.g. 1.6.1*04
e.g. 1.6.1&04
The identification by the energy supply company itself uses an identification
number. ID1.1 (designation of ownership by the energy supply company),
ID1.2 (any desired number) or ID2.1 (serial number) are available. The
identification is comprised as follows in this case:
/LGZ...
/LGZ 4...
/LGZ4 \2...
/LGZ4\2 \B40...
/LGZ4\2\B40 12345678
Manufacturer (Landis+Gyr)
Transmission rate 4 = 4800 bps
Extended communication possibility
2 = DLMS-compatible meter
Meter Type of measuring unit
Basic version tariff section
Additional functions
(auxiliary power supply)
Firmware version
The hyphen following the identification
number and the rate (1.6.1) denotes the
type of resetting:
*04 Resetting made internally or
remote controlled
&04 Resetting performed manually
Manufacturer (Landis+Gyr)
Transmission rate 4 = 4800 bps
Extended communication possibility
2 = DLMS-compatible meter
Meter Firmware version
Identification number specified
by parameterisation (maximum 8
characters)
73/96
© Landis+Gyr