Service Menu - Landis+Gyr E650 Series 4 User Manual

Operation
5.4.3

Service menu

Service menu
Value display
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
Figure 70. Service menu overview
Pressing the reset button during the display check changes the display to
the service menu or directly to the service list. The first menu item appears,
e.g. the service list:
The menu item only appears if there are several items present. Otherwise
pressing the reset button directly leads to the values of the service list.
The next menu item appears for every further brief operation of the display
"down" button, e.g. "Set mode", "Test mode on/off", etc. The first item
appears again following the last menu item "End".
The preceding menu item appears again by pressing the "up" button
briefly.
Both display ("down" and "up") buttons must be pressed simultaneously to
return to the operating display from the service menu.
The first value of the list associated with the present menu is displayed by
pressing the display "down" or "up" button for longer (at least 2 seconds).
The next list value appears for every further brief operation of the display
"down" button. Brief operation of the "up" button again displays the
69/96
© Landis+Gyr