Landis+Gyr E650 Series 4 User Manual page 67

Operation
Value display
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
The menu item only appears when several menu items exist. Otherwise
direct entry is made to the display list.
The next menu item appears for every further brief operation of the display
"down" button, e.g. "Data profile", "Event log", etc. The first menu item
appears again after the last item.
The preceding menu item is displayed again by briefly pressing the display
"up" button.
Both display ("down" and "up") buttons must be pressed simultaneously to
return to the operating display from any display menu.
The first value of the list associated with the present menu is displayed by
pressing the display "down" or "up" button for longer (at least 2 seconds),
and is normally the error message:
The next list value appears for every further brief operation of the display
"down" button. Brief operation of the "up" button again displays the
preceding value. The sequence of values in the list is determined by the
parameterisation.
A rapid run is started by holding down the display "down" or "up" button for
longer (at least 2 seconds). The main values of the list are then displayed
while the button remains pressed, but no stored values.
Examples of values in a display list:
67/96
Reset counter
Date of resetting
stored value 03 (March)
Cumulated maximum
demand
active power
rate 1
Active energy
present status
rate 1
Reactive energy
present status
rate 1
© Landis+Gyr