Service; Alarm Reset Button; Service Menu - Landis+Gyr ZMQ202 User Manual

6

Service

6.1

Alarm Reset Button

6.2

Service Menu

Short press down display button (<2s)
Long press down display button (>2s)
Short press up display button (<2s)
Long press down display button (>2s)
Short press down display button
until "End" is displayed then
long press down display button
R
Alarm reset button (under utility's seal)
H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
Service
Access to the alarm reset button is protected by the utility's seal. It is
R
located behind the front door of the wall-mounted f6 and behind the
front cover of the rack-mounted f9.
The alarm reset button has three functions:
1. Reset an alarm. Meter failure alarms are cleared by pressing the alarm
reset button.
2. Select the Service Menu from the display check.
3. Perform the cursor function in Set Mode.
Operating display
Display check
Operating menu
Service menu
R
Set mode
Service list
Installation diagnostic
Test mode
Battery on/off display
End of service menu
Landis+Gyr
67/88