5.4.4 Data initialization through service operation
All the data can be initialized with the service data #8 clear operation.
For details on the initialization procedure and the data that is erased, see Chapter 3: 5.2
Service Data Settings on Page 3-54.
REFERENCE
"All clear" when nothing works.
On a rare occasion, the display may go blank and all the buttons may stop working.
Severe electrical noise and static can cause problems as well. In such a case, use the "All
clear" feature.
NOTE
After installing the unit for the first time and connecting the power cord, execute "All
clear."
Also, after an "All clear," we recommend that you set the country type to suit the
communication standard used in your country. Below is the procedure for performing
All clear and type setting operation.
ALL CLEAR
FUNCTION
Standby
TYPE SETTING
FUNCTION
Select the country by
Standby
While waiting to return to the ready state after executing "All clear", please do not press
the STOP button. Doing so may cause a malfunction afterwards.
FAX-L260i Chapter 1: General Description
#
#8 CLEAR
4 times
ALL
START/COPY
#5 TYPE
#
4 times
key
Figure 1-20 All Clear and Type Setting
1-39
START/COPY
Execute All clear
START/COPY
START/COPY
STOP