Canon FAX-L260i Service Manual page 49

Reception image data transfer
When reception images cannot be output due to printer failure, etc., the image data can be
transferred to another fax machine by using the reception image data transfer function. To
transfer reception image data, set SSSW #1 SW01 bit2 to "1", then follow the procedures
NOTE
below.
Figure 1-19 Reception Image Data Transfer
Be sure to return SSSW #1 SW01 bit2 to "0" after the reception image data transfer ends
normally.
FAX-L260i Chapter 1: General Description
FUNCTION
MEMORY REF
03
FUNCTION
MEMORY REFERENCE
DELETE DOCUMENT
< >
10 12
TX
START/COPY
TX/RX NO. XXXX
< >
10 12
Select document.
TX/RX NO. XXXX
START/COPY
SELECT LOCATION
TEL=
Numeric button
Input dial number.
TEL=XXXXXXXX
START/COPY
CALLING Start transfer.
1-35