Canon FAX-L260i Service Manual page 144

FAX-L260i Chapter 3: Maintenance & Service
• Marks on back of paper
Solutions:
• Black vertical lines
Solutions:
• Irregular and smudged black vertical lines
Solutions:
• Irregular and smudged black horizontal lines
Solutions:
• Marks
Solutions:
• Blank spots
Solutions:
(1) Copy a few white paper documents.
(2) If the marks are at intervals of approx. 50mm (1.96"), clean the transfer charging
roller, but if they are at intervals of approx. 63mm (2.48"), clean the pressure
roller.
(3) Clean the paper feed guide and fixing entrance guide.
(4) Replace the transfer charging roller.
(5) Replace the pressure roller.
(1) Open the front cover during printing, and remove the toner cartridge. Open the
cartridge drum cover shutter manually, and check whether there are black verti-
cal lines on the photosensitive drum. If there are black lines, replace the toner
cartridge. If not, go the following step.
(2) Clean the face-down eject roller.
(3) Clean the fixing entrance guide.
(4) Replace the fixing ass'y.
(1) Clean the fixing entrance guide.
(2) Replace the toner cartridge.
If the irregular smudged black lines occur cyclically, replace the toner
cartridge. If they are non-cyclical, replace the fixing ass'y.
(1) If the marks are at intervals of approx. 50mm (1.96"), clean the transfer charging
roller; if they are at intervals of approx. 75mm (2.95"), clean the fixing ass'y;
and if they are at intervals of approx. 75mm (2.95"),or 38mm (1.5"), replace the
toner cartridge.
(2) Clean the paper feed guide.
(3) Clean the fixing entrance guide.
(1) Clean the transfer charging roller.
(2) Replace the transfer charging roller.
(3) Replace the toner cartridge.
(4) Check for foreign matter button the transfer charging roller gear and the drive
gear.
(5) Clean the developing bias contact and the toner cartridge contact.
(6) Replace the PCNT board.
(7) Replace the power supply unit.
(8) Replace the SCNT board.
3-48