Canon FAX-L260i Service Manual page 116

FAX-L260i Chapter 3: Maintenance & Service
Cause b):
Solutions b):
##1006 [TX/RX] Channel unacceptable.
Cause:
Solutions:
##1007 [TX/RX] a) Call awarded and being delivered in an established channel.
Cause a):
Solutions a):
Cause b):
Solutions b):
##1008 [TX/RX] Call identity does not belong to a parked connection.
Cause:
Solutions:
Indicated above
(1) Re-check the designated bearer service.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and S peech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Wait a while and then transmit, because the other terminal is in the middle of a
transmission.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
b) Call identity not exist.
Indicated above
(1) Wait a while, then re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
3-20