Canon FAX-L260i Service Manual page 118

FAX-L260i Chapter 3: Maintenance & Service
##1018 [TX/RX] No user responding
Cause:
Solutions:
##1019 [TX/RX] No answer from user (user alerted).
Cause:
Solutions:
##1021 [TX/RX] Call rejected
Cause:
Solutions:
##1022 [TX/RX] Number changed.
Cause:
Solutions:
Indicated above
(1) Re-transmit.
(2) Make sure that the other party's machine is plugged in and connected to the line.
(3) Output a communications analysis list, and analyze it.
(4) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(5) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(6) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Wait a while, then re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-check the phone number and try the call again.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
3-22