Canon FAX-L260i Service Manual page 68

FAX-L260i Chapter 2: Technical Reference
NOTE
Paper feed jam detection
There are two types of paper jam which may occur:
a) Paper feed delay jam
The paper feed delay jam occurs if the paper edge sensor does not detect the leading
edge of the recording paper within 7.0 seconds (including paper feed jam detection retry
time) after the pickup solenoid releases the pickup roller.
b) Paper feed stationary jam
The paper feed stationary jam occurs if the trailing edge of the recording paper is not
detected within 11.7 seconds after the paper edge sensor detects the leading edge of the
recording paper.
When either of these jams is detected, the message "CLEAR PAPER JAM" is dis-
played. If this machine is receiving, the data is received via memory reception. If the
machine is copying from memory, the image data in memory will be cleared.
To clear a paper feed jam, open the front cover and remove the jammed recording paper
from inside. When the front cover is closed, the recording paper is automatically output.
When jammed recording paper is removed from inside without opening the front cover,
open and close the front cover once to reset the printer.
Paper size error
The machine does not have a paper size sensor. It recognizes the paper sizes (Letter, A4,
and Legal) according to the user data setting.
A paper size error occurs if the specified paper size is different from the size of the paper
placed in the sheet feeder when one page is actually printed. In this case, a message
"CHECK PAPER SIZE" appears on the display, the ALARM lamp blinks, and the
following operation is carried out.
If the specified paper length is greater than the actual paper length:
When the received document comprises one page, one sheet is printed and operation ends.
The error message remains displayed, so clear the error message. When the received docu-
ment comprises two or more pages, it is received in memory from the second sheet on-
ward. Printing automatically starts from the 2nd sheet onwards after the error is corrected.
If the specified paper length is less than the actual paper length:
Regardless of whether the document consists of only one sheet or two or more sheets, it
will be received in memory.
The document is automatically output after the error is corrected.
To correct the error, either match the user data setting with the actual recording paper, or
match actual recording paper with the user data setting.
The paper size error does not occur during copying.
2-10