Canon FAX-L260i Service Manual page 130

FAX-L260i Chapter 3: Maintenance & Service
##1092 [TX/RX] Disconnection from network
Cause:
Solutions:
##1095 [TX/RX] Invalid message, unspecified
Cause:
Solutions:
##1096 [TX/RX] Mandatory information element is missing
Cause:
Solutions:
##1097 [TX/RX] Message type non-existent or not implemented
Cause:
Solutions:
Indicated above
(1) Re-check the phone number and try the call again.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-check the designated service contract, and re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in #4B ISDN
BASIC G4/G3 Fallback and Speech Fallback on page 3-74.
(4) Take countermeasures as outlined in D-channel connection error in Commu-
nication problems on page 3-52, Section 4.3.4 .
(5) Make an inquiry to the maker of the Switching equipment.
3-34