Canon FAX-L260i Service Manual page 210

FAX-L260i Chapter 3: Maintenance & Service
TX/RX NO
CONNECTION TEL
(OTHER PARTY)
SUBADDRESS
CONNECTION ID
START TIME
USAGE TIME
PAGES
RESULT
MAKER CODE
MACHINE CODE
RX/TX
Figure 3-32 Service Error Activity Report (receiving)
: Indicates four digits of the transaction number
: Number sent from the other party or number dialled
(lower 20 digits)
: Indicates the designated subaddress
: ID sent from the other party, if the other party is a Canon fax
: Communication start time (on 24-hour display)
: Communication time (in minutes and seconds)
: Number of pages for which receiving was complete
(For details, see User's guide )
: "NG" display with number of pages for which receiving was fault, and ser-
vice error code
: Maker code (For details, see Chapter 4: 4. MAKER CODE on page 4-6 )
[1000 1000]
: For future use
: Received/transmitted protocol signal
bit 1 to bit 56 of received/transmitted DIS, DCS, or DTC
Indicates a Canon fax
lower nibble
upper nibble
3-114