Canon FAX-L260i Service Manual page 264

See Page
FIGURE 5-b
2-5
J203~
J203~
LASER
LASER
J402~
COVER SENSOR
J202~
PAPER SENSOR
J401~
MAIN MOTOR
J201
J402
J401
J202
J201
J203
SPEAKER~
SCNT-J3
J201~
SCNT-J1
J201~
J203~
SCNT-J8
FIXING FILM
J401~
READ MOTOR
Route the cables on the PCNT and PSU boards as
shown in the figure.
See Page
FIGURE 10-c
2-10
a
b
To attach the SWITCH LEVER ASS'Y: with portion
(a) lifted up, and while continuing to press upward
on pin (b), rotate the ass'y in the arrow's direction.
See Page
FIGURE 6-a
2-6
a
Attach the CABLE COVER by hooking the
projections into the slots as shown by the arrows.
Be careful not to pinch the cables (a).
See Page
FIGURE 10-d
2-10
a
After attaching the PAPER FEED UNIT to the frame,
hook portions (a) into the slots as shown by the
arrows.
See Page
FIGURE 10-a
2-10
SCREW
Do not loosen or remove the two black screws on
the SCANNER ASS'Y.
See Page
FIGURE 11-a
2-11
When removing the PRESSURE PLATE, use a fine
screwdriver to press the clips outward and unhook
them.
FAX-L260i 5.GUIDE TO REPLACEMENT
See Page
FIGURE 10-b
2-10
Attach the ACTUATOR BASE retaining clip to the
frame as shown by the arrow.
See Page
FIGURE 11-b
2-11
FILM
Be careful not to touch hte film on the FIXING ASS'Y
with your hands.
5-2