Canon FAX-L260i Service Manual page 88

FAX-L260i Chapter 2: Technical Reference
d) Layer 5 (Continue)
Message
RSCCP
CSUI
RSUI
CSA
RSAP
CDS
CDE
RDEP
CDPB
RDPBP
RDPBN
CDCL
RDCLP
CDR
RDRP
CDD
RDDP
RDGR
CDUI
Description
Response Session Change
Control Positive
Command Session User
Information
Response Session User
Information
Command Session Abort
Response Session Abort
Positive
Command Document Start
Command Document End
Response Document End
Positive
Command Document Page
Boundary
Response Document Page
Boundary Positive
Response Document Page
Boundary Negative
Command Document
Capability List
Response Document
Capability List Positive
Command Document
Resynchronize
Response Document
Resynchronize Positive
Command Document
Discard
Response Document Discard
Positive
Response Document
General Reject
Command Document User
Information
2-30
Remark
Reply for CSCC
Indicates that there is a document procedure com-
mand.
Indicates that there is a document procedure re-
sponse.
Sent when the session procedure is halted.
Reply for CSA.
Sent when the document procedure is started. States
the size and resolution of pages that are able to be
transmitted to CDE.
Sent when the document procedure is completed.
Reply for CDE.
Sent when it is shown that there is a gap between
pages. A check point reference nunber is added as a
parameter.
Sent when a page designated as CDPB is OK. A
check point reference number is added as a param-
eter.
Sent when a page designated as CDPB is NG. A
check point reference number is added as a param-
eter.
Indicates the function of the sending side (page size,
resolution).
Indicates the function of the receiving side (page size,
resolution).
Sent when the document procedure on the sending
side is halted.
Reply for CDR.
Sent when the document procedure on the sending
side is halted.
Reply for CDD.
Sent when a document procedure error is discovered
on the receiving side.
Indicates that there is data from layer 6 and higher
(MMR).