Table of Contents
Advertisement
2. Installation
Wiring
: Only authorized or certified personnel should be allowed to perform wiring.
Wiring by unauthorized or uncertified personnel may result in bodily injury
and/or malfunction of the robot system.
Connector lock (PS series)
: Be careful not to get hands or fingers caught while pushing down the
connector lock lever because you should apply strong force to it.
For Clean-model
: When the Manipulator is a Clean-model, use it with an exhaust system.
For details, refer to the Manipulator manual.
For Protected-model
: Connect the power cable connection and the signal cable connector to the
Manipulator immediately
Manipulator without connecting them may result in electric shock and/or
malfunction of the robot system as it cannot ensure IP65.
42
after the Manipulator installation.
RC520 Safety and Installation Rev.2
The
Advertisement
Table of Contents
