Second Step; Connection With External Equipment - Epson RC520 Safety And Installation

4. Second Step

Setup other necessary functions after operating the robot system as indicated in 3.
First Step.
Manuals that indicate necessary setups and procedures are guided in this section.
(For descriptions of each manual, refer to 5. Third Step.)

4.1 Connection with External Equipment

Remote Control
EPSON RC+ User's Guide
Remote Control
ROBOT CONTROLLER RC520 manual
Setup & Operation 8. I/O Remote Set Up
I/O
EPSON RC+ User's Guide
ROBOT CONTROLLER RC520 manual
Fieldbus I/O (Option)
EPSON RC+ Option Fieldbus I/O manual
Ethernet I/O (Option)
EPSON RC+ User's Guide
Ethernet Communication
ROBOT CONTROLLER RC520 manual
Setup & Operation 8. I/O Remote Set Up
RS-232C (Option)
EPSON RC+ User's Guide
RS-232C Communication
ROBOT CONTROLLER RC520 manual
Setup & Operation 9. RS-232C Board
RC520 Safety and Installation Rev.2
I/O Setup
Setup & Operation 6. I/O Connector
Setup & Operation 7 Expansion I/O Board (Option)
4. Second Step
53