Lucent Technologies DEFINITY AUDIX Installation And Administration Manual page 71

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4 Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix
Defining Call Coverage Paths for Subscribers
1. At the switch administration terminal, enter add coverage path number ,
where number is the Call Coverage Path Number assigned in
B-4.
The switch displays the Coverage Path screen.
change coverage path 2
COVERAGE CRITERIA
Station/Group Status
Don't Answer?
DND/SAC/Goto Cover?
COVERAGE POINTS
Terminate to Coverage Pts. with Bridged Appearance? n
Point1: h150
Point4:
Figure 4-6. Example Subscriber Coverage Path Screen
2. Use the entries in the table below to complete the Coverage Path screen.
COVERAGE PATH
Coverage Path Number: 2
Next Path Number:
Inside Call
Active?
Busy?
All?
Point2:
Point5:
Linkage
Outside Call
n n
y y
y y
n n
y y
Point3:
Point6:
Issue 1
May 1999
4-17
Worksheet
Page 1 of 1 SPE A
Number of Rings: 3