Lucent Technologies DEFINITY AUDIX Installation And Administration Manual page 114

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Check the Status of the Switch Names Audit
Figure 5-16. Audit Results Screen
2. Check the Result field for the Switch Names audit. If it displays Passed,
proceed to the next step. If it displays Running, wait a few minutes and
repeat Step1. Repeat Steps 1 and 2 until the audit screen displays
Passed, then proceed with the next step.
If the audit does not complete successfully, see DEFINITY AUDIX
System — Maintenance , 585-300-121 for instructions to troubleshoot this
problem.
3. If the audit passes, type display administration-log at the DEFINITY
AUDIX command line and press
The system displays the Administration Log screen.
.
RETURN
Issue 1
May 1999
5-22