Task 9-3: Run Test Mo-Disk; Voice Mail - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
7 Joint Acceptance Testing
Run Test MO-Disk
3. Create a test Voice Mail message.
4. Retrieve the test Voice Mail message.
5. Continue with
Task 7-3: Run Test MO-Disk
At this point, the backup MO disk added in
magneto-optical disk drive.
1. Check the status of the MO disk drive.
e. If the Name Record by Subscriber feature is on, the DEFINITY
AUDIX system prompts you to record a name. Record a test name,
for example, "test name."
f. Press and then press
2
from the first test extension.
g. After listening to the message, press
a. From the DEFINITY AUDIX session you are currently in, press
b. After the tone, speak a test message (for example "This is a test
Voice Mail message.")
c. When you have finished speaking the message, press
approve the message.
d. When prompted for a destination extension, enter the extension of
the first test telephone and press
e. Press again to deliver the test message.
#
f. Hang up.
a. Walk back over to the first test telephone and check the MWI. It may
take a minute or two for the MWI to turn on. When it is on, Continue
with the next step. If the MWI does not activate, refer to the
troubleshooting procedures in DEFINITY AUDIX System —
Maintenance , 585-300-121 to activate the MWI.
b. Call the DEFINITY AUDIX extension to retrieve the message.
c. After the DEFINITY AUDIX system answers and prompts you for
your extension, press
d. When the DEFINITY AUDIX system prompts you for your password,
press . There is no password assigned to this extension.
#
e. Press and then press
2
from the second test extension.
f. After listening to the message, press
g. Hang up.
Task 7-3.
to listen to the message you recorded
0
* D
to end the addressing.
#
.
#
to listen to the message you recorded
0
D
*
Task 5-3 should still be in the
Issue 1
May 1999
to delete the message.
1
to
#
to delete the message.
7-4
.