Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
10
Customer Acceptance
Alarm Origination Administration Test and Status MO Disk
5. Press
Maintenance screen
Figure 10-2. System-Parameters Maintenance Screen - Page 2
If
Worksheet C-9
switch only , enter n in the Alarm Origination Active? field. If either audix only , or audix
& switch , is indicated on the worksheet, enter y in the Alarm Origination Active?
field.
6. Ask the INADS personnel to log in and display the System-Parameters
Maintenance screen. The following steps should then be completed by INADS
personnel:
!
CAUTION:
Do not modify the initialization string unless the remote service
center tells you to do so.
If you have a different modem, see
Port C Modems)''
Alarm Origination Remote Access Port Baud Rate
(F7) to display the second page of System-Parameters
NEXTPAGE
indicates that alarm origination is to be activated through the
a. Check that the login is successful.
''Modem Option Settings (for
in
Appendix H
to optimize this initialization string.
Issue 1
May 1999
10-3
Need help?
Do you have a question about the DEFINITY AUDIX and is the answer not in the manual?
Questions and answers