Lucent Technologies DEFINITY AUDIX Installation And Administration Manual page 105

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
2. With the cursor on the DEFINITY AUDIX command line, enter change
system-parameters IMAPI-options
The system displays the System-Parameters IMAPI-Options screen
Figure 5-8. System-Parameters IMAPI-Options Screen
3. Move the cursor to the Maximum Number of ENABLED IMAPI
Sessions field. The value in this field should be 32
4. Move the cursor to the Enable Check New Messages field. Type y. This
allows clients to check for new messages without the overhead of logging
in. If left at n, automatic new message notification from I
Manager is disabled.
5. Leave the value of the Enable Deliver CA Message field as n.
Entering y enables the public class-of-service function.
6. Move the cursor to the Enable Voice File Transfer field. Enter y to
enable the use of the personal folder and a sound card in I
Manager and also to enable voice file transfer for all subscribers who have
IMAPI Voice File Transfer enabled.
NOTE:
The System Parameters IMAPI-Options screen cannot be accessed
if I Message Manager was not purchased.
NTUITY
Issue 1
May 1999
5-13
.
Message
NTUITY
Message
NTUITY